Quad notched-band UWB BPF based on quintuple-mode resonator

Borhani, Seyyed Jamal, Honarvar, M. Amin and Virdee, Bal Singh (2017) Quad notched-band UWB BPF based on quintuple-mode resonator. International Journal of Microwave and Wireless Technologies, 9 (7). pp. 1433-1439. ISSN 1759-0787

Abstract

The design of a novel microstrip ultra-wideband (UWB) bandpass filter (BPF) with quad narrow notched-band functionality is presented. The filter consists of a multi-mode resonator (MMR) constituted from two modified stepped-impedance stubs that generate six resonate modes, five of which are within the UWB passband where the sixth mode is used to extend the upper stopband of the filter. Two transmission zeroes are located at the 3-dB edge of the passband to enhance the filter’s selectivity with a skirt factor of 0.955. The MMR is fed through asymmetric interdigital coupled-lines feed to produce controllable notched-band. Additional notched-bands are generated with a parasitic coupled line. The notched-bands are centered exactly to eliminate interference at 5.2 GHz (WLAN), 5.8 GHz (WLAN), 6.8 GHz (RFID), and 8 GHz (X-band). Good agreement is obtained between simulation and measurement results. The highly compact filter has dimensions of 8.0mm × 9.83mm.

Documents
1309:7087
[thumbnail of Finalised-Quad Notched.pdf]
Preview
Finalised-Quad Notched.pdf - Accepted Version
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (800kB) | Preview
Details
Record
View Item View Item