De Gromoboy Dabrowicki, Tadeusz Szczęsny (1966) The anodic dissolution of nickel in acid sulphate solutions containing organic sulphur compounds. Doctoral thesis, Sir John Cass College.
The effect of a) pretreatment, b) nature of solution, c) conditions of polarization on the anodic dissolution and passivation of Ni has been studied using potentiostatic, potentiodynamic and galvanostatic techniques. In particular the effect of pH and additions of sulphur compounds (sodium sulphide, thiourea, thioacetamide, thiosemicarbazide, and ethyl isothiocyanate) on the passivation of Ni in sulphuric acid and in acetic acid-acetate buffers has been studied by the above techniques and by potential decay curves.
Electronmicroscopy has been used to investigate the surface topography of nickel after anodic polarization in the presence of sulphur addition compounds. Comparisons have been made between the electrochemical characteristics of pure nickel and nickel-tin alloy with a 1:1 ratio of Ni:Sn.
Potentiostatic studies have revealed that traces of impurities (in particular, traces of certain S-compounds) give curves having more than one passivation potential. Arrest potentials were detected in pure solutions using the galvanostatic technique, and these appear to correspond to the passivation potentials in solutions containing deliberate additions of impurities. These potentials are linearly related to pH and correspond to the reversible potentials of NiₓOᵧ/Ni systems. It is thought that each passivation potential is therefore a manifestation of a direct oxidation of Ni to the corresponding oxide, i.e. NiO, Ni₃O₄, Ni₂O₃ and NiO₂, depending on the potential. The Pourbaix potential/pH diagram for the Ni-H₂O system does not provide for the formation of NiO and higher oxides directly from nickel and a modified potential/pH diagram is therefore proposed.
The presence of sulphide has been found to affect the formation of protective oxide films adversely, films of lower oxides being affected to a greater extent than those of higher oxides. The mode of nickel dissolution and oxide film formation are also affected by the crystal structure of the nickel surface.
The inhibiting nature of the thiocompounds has been shown to be a function of the electron inductive characteristics of the groups attached to the C=S group, whilst the lowering of the activation overpotential caused by low concentrations of some thiocompounds, has been shown to be caused by sulphide ions resulting from the hydrolysis of these compounds.
There are some indications that the formation of nickel oxides on the nickel-tin alloy contributes to the passive nature of this alloy.
![]() |
View Item |
Lists
Lists