Suggestions in Courses
See all course resultsSuggestions in News
- No suggestions found.
Suggestions in Events
See all events results
Ab-Malek, Kamarudin (1987) On the puncture strength of rubber. Doctoral thesis, Polytechnic of North London.
Abdul Wahab, Mohammad Azizol (2007) Set behaviour of epichlorohydrin elastomers. Doctoral thesis, London Metropolitan University.
Aghaei, Elmira and Avakh Darestani, Soroush (2023) A fuzzy decision support system for evaluating lean-green and company-specific production system. Environmental science and pollution research international, 31. pp. 5444-5456. ISSN 1614-7499
Arora, Bholan Ruby (1990) Processing behaviour of NR latex with special reference to dipping. Doctoral thesis, Polytechnic of North London.
Avakh Darestani, Soroush, Ammar, Mollaie and Dadd, Deneise (2021) Developing a transfer point location problem considering normal demands distribution. Journal of Optimization in Industrial Engineering, 15 (1). pp. 109-119. ISSN 2423-3935
Azahari, Baharin Bin (1990) An investigation into the relationship between processing, orientation and properties of low density polyethylene films. Doctoral thesis, Polytechnic of North London.
Barrutia, Esther (1984) Synthesis and performance of novel azo initiators with special reference to emulsion polymerisation. Doctoral thesis, Polytechnic of North London.
Bassett, Julian Charles (1991) The formation of brittle phases in brazed zirconium joints. Doctoral thesis, City of London Polytechnic.
Berry, Colin (1993) An investigation into the polyethylene extrudates produced by simultaneous orientation and high temperature quenching. Doctoral thesis, University of North London.
Brinson, Mike and Grabinski, Wladek (2024) FOSS CAD/EDA tools supporting the open access PDK initiative. In: FOSDEM 2024, 3 - 4 February 2024, Brussels.
Dalimunthe, Rusdan (1989) Modification of natural rubber by graft copolymerisation of non-ionogenic hydrophilic monomers in latex. Doctoral thesis, Polytechnic of North London.
Dohale, Vishwas, Ambilkar, Priya, Bilolikar, Vijay, Narkhede, Balkrishna Eknath, Kumar, Ashwani and Kumar, Anil (2023) Evaluating circular economy and smart technology adoption barriers in the Indian textile and apparel industries using Neutrosophic ISM. Annals of Operations Research. ISSN 1572-9338
Fereday, George and Fereday, Tom (2024) Sibling chair. [Artefact]
Itim, Bachir and Philip, Mathew (2015) Effect of multiple extrusions and influence of PP contamination on the thermal characteristics of bottle grade recycled PET. Polymer Degradation and Stability, 117. pp. 84-89. ISSN 0141-3910
Kalyani, N. M. V. (1988) Effects of water-soluble polymers upon some properties of natural rubber latex. Doctoral thesis, Polytechnic of North London.
Kareaga Laka, Zorion (2016) Dynamic stiffness and damping prediction on rubber material parts, FEA and experimental correlation. Doctoral thesis, London Metropolitan University.
Kariminejad, Mandana, Tormey, David, Huq, Saif, Morrison, Jim and McAfee, Marion (2021) Comparison of intelligent approaches for cycle time prediction in injection moulding of a medical device product. In: 37th International Manufacturing Conference, 7 - 8 September 2021, Athlon Institute of Technology, Online.
Kariminejad, Mandana, Tormey, David, Huq, Saif, Morrison, Jim and McAfee, Marion (2021) Comparison of intelligent approaches for cycle time prediction in injection moulding of a medical device product. In: IEEE RTSI 2021: 6th online Forum on Research and Technologies for Society and Industry Innovation for a smart world, 6 - 9 September 2021, Italy, Online.
Kariminejad, Mandana, Tormey, David, Huq, Saif, Morrison, Jim and McAfee, Marion (2021) Ultrasound sensors for process monitoring in injection moulding. Sensors, 21 (15). pp. 1-22. ISSN 1424-8220
Loh, Aaron Chun-Pong (1982) Further investigations of the prevulcanization of natural rubber latex. Doctoral thesis, Polytechnic of North London.
McAfee, Marion, Kariminejad, Mandana, Weinert, Albert, Huq, Saif, Stigter, Johannes D. and Tormey, David (2022) State estimators in soft sensing and sensor fusion for sustainable manufacturing. Sustainability, 14 (6). pp. 1-34. ISSN 2071-1050
Narula, Sanjiv, Tamvada, Jagannadha Pawan, Kumar, Anil, Puppala, Harish and Gupta, Nakul (2023) Putting digital technologies at the forefront of Industry 5.0 for the implementation of a circular economy in manufacturing industries. IEEE Transactions on Engineering Management, 71. pp. 3363-3374. ISSN 1558-0040
Naseer-Ahmed (1992) Synergic control in MIG welding and penetration control in TIG welding. Doctoral thesis, London Guildhall University.
Onyshchenko, Elena (2016) Characterisation of network structure in recycled rubber. Doctoral thesis, London Metropolitan University.
Oropallo, Gabriele (2014) Design for the real lifespan: comparing two twentieth-century strategies for social and economic sustainability through life-cycle planning. In: Tradition, Transition, Trajectories: Major or minor influences? ICDHS 2014: 9th Conference of the International Committee for Design History and Design Studies, 8-11 July 2014, University of Aveiro, Portugal.
Oropallo, Gabriele (2017) How long should things last? Design in the GDR. Form, 40 (270). pp. 105-112. ISSN 0015-7678
Oropallo, Gabriele (2018) People have the power: appropriate technology and the implications of labour-intensive making. In: Craft economies. Bloomsbury, London, pp. 83-93. ISBN 9781474259538
Oropallo, Gabriele (2019) The fixing I: Repair as prefigurative politics. In: Design culture: objects and approaches. Bloomsbury, London, pp. 157-169. ISBN 9781474289849
Oropallo, Gabriele (2013) The secret language of objects: Geraldo De Barros's industrial design. In: Geraldo de Barros: Isso. Edições SESC. ISBN 9788579950551
Popoola, Kolapo Albert (1988) Mechanical reinforcement of films from rubber latices by added polymer particles. Doctoral thesis, Polytechnic of North London.
Pyall, Nicholas (2014) Guitar stringing in late nineteenth-century North America: the emergence of steel. Journal of the American Musical Instrument Society, 40. pp. 29-74. ISSN 0362-3300
Roca Perez, Rafael (1983) Interaction of phenol-formaldehyde condensates with isoprene rubber. Doctoral thesis, Polytechnic of North London.
Rostami, Parinaz, Avakh Darestani, Soroush and Movassaghi, Mitra (2022) Modelling cross-docking in a three-level supply chain with stochastic service and queuing system: MOWFA algorithm. Algorithms, 15 (8) (265). pp. 1-21. ISSN 1999-4893
Sahrom, Bin Hasshim (1983) Energy changes on deformation of a pneumatic tyre. Doctoral thesis, Polytechnic of North London.
Said, Ma'zam Md. (1989) Peroxide prevulcanization of natural rubber latex. Doctoral thesis, Polytechnic of North London.
Samsuri, Azemi Bin (1989) Tear strength of filled rubbers. Doctoral thesis, Polytechnic of North London.
Sandford, Andrew Robert Brian. (1990) Effect of manganese and nickel on the cleavage fracture strength of ferritic weld metal. Doctoral thesis, City of London Polytechnic.
Searle, R. J. (1988) Modification of the mechanical properties of synethetic hydrogels by various techniques. Doctoral thesis, Polytechnic of North London.
Shukri, Bin Abdul Wahab (1982) Coagulant dipping of natural rubber latex. Doctoral thesis, Polytechnic of North London.
Smith, Marilyn (1990) The colouring, sealing and abrasion resistance of anodic oxide coatings. Doctoral thesis, City of London Polytechnic.
Vahabi Nejat, Shadi, Avakh Darestani, Soroush, Omidvari, Manouchehr and Amin Adibi, Mohammad Amin (2021) Evaluation of green lean production in textile industry: a hybrid fuzzy decision-making framework. Environmental Science and Pollution Research, 29. pp. 11590-11611. ISSN 1614-7499
Zarrat Dakhely Parast, Zeinab, Avakh Darestani, Soroush and Haleh, Hassan (2023) Optimization of green reverse supply chain network: a case study in the dairy industry. International Journal of Management and Decision Making, 22 (4). pp. 412-433. ISSN 1741-5187
![[up]](/style/images/multi_up.png)
Up a level